350 CFM High Efficiency Filter | Ingersoll Rand FA600IH

$574.00

FA-(G) (H) (D) (A) Series Compressed Air Line Filters

A SOLUTION FOR EVERY APPLICATION

At different points of use, different compressed air purities might be needed, depending on the application. The various air purity classes are provided in the table below, which clearly shows the various Ingersoll Rand filters and dryers that meet all the different classes.

G – Series     |     0.1 ppm (Oil)  & 1 micron (Particulate) Filter rating

H – Series     |     0.01 ppm (Oil) & 0.01 micron (Particulate) Filter rating

D – Series     |     1 micron (Particulate) Filter rating

A – Series     |      0.003 ppm (Oil Vapor – Carbon) Filter rating

 

SKU: FA600IH Categories: ,

Product Description

PERFORMANCE & DIMENSIONS

  • Air System Design Capacity:  350 CFM @ 125 PSIG
  • Filtration Efficiency Rating:
    • Liquid Removal = 0.01 ppm
    • Particle Filtration = 0.01 micron
  • Inlet Pressure Range:  0-250 PSIG
  • Maximum Operating Pressure:  250 PSIG
  • Dimensions:  6.7″ L x 6.7″ W x 20.4″ H
  • Connection Size:  2″ NPT
  • Shipping Weight:  11.5 Lbs
  • ISO Certification
    • ISO 8573-2
    • ISO 12500
  • SKU Part # FA600IH
  • * 1-YEAR Full Warranty & Protection Program

 

HARINGA COMPRESSOR OFFERS THE RIGHT SOLUTION!

Compressed air can be contaminated by dirt, water and oil, which can be further divided as follows:

  • DIRT: micro-organisms, dust, solid particles, rust particles.
  • WATER: water vapor, condensed liquid water, water aerosols, acidic condensates.
  • OIL: liquid oil, oil aerosol, hydrocarbon vapor.

Haringa offers a wide selection of filtration solutions and application knowledge.  Different product types and grades are available to meet your every demand.

 

Optimal filtration

Ingersoll Rand FA-Series Filter Grades (G) (H) (D) (A) efficiently prevent dust, particulates and micro-organisms arising from corrosion, dirt and adsorption material from entering your compressed air stream. These innovative filtration solutions are engineered to cost-effectively provide the best air purity and meet today’s increasing quality demands.

 

Patented dual indicator shows differential pressure drop and economical operating efficiency

Patented smooth bore flow insert directs air into the filter element, minimizing turbulence and pressure losses

All-aluminum, precision die cast body suitable for 80°C (176 °F) and 17 bar g (250 psig) MAWP applications

Proprietary coating applied to the inside and outside surfaces provides corrosion protection in harsh industrial environments

Filter element with stainless steel mesh withstands high differential pressure while minimizing fl ow restriction through the element

Ergonomic bowl design with no-touch filter element simplifies element replacement

Industrial-grade brass float drain discharges accumulated condensate and oil more reliably than lesser quality plastic drains (no-loss and manual drains also available)

Deep-pleated filter media reduces air flow velocity to maximize filtration efficiency and minimize pressure losses

High-efficiency drainage layer improves liquid drainage properties and enhances chemical compatibility

Simple visual alignment of the filter head and bowl ensures accurate assembly of components  and helps to improve safety

 

 

 

CERTIFIED PERFORMANCE

Atlas Copco filters are qualified according to the ISO 8573-1:2010 standard. This is the latest edition of the standard.  Beware of filters that comply with earlier editions, such as ISO 8573-1:1991 or ISO 8573-1:2001.  The difference is inferior quality of the delivered compressed air. This qualification is a result of our filters being tested according to ISO 12500-1:2007, ISO 12500-2:2007, and ISO 12500-3:2009. These specify the test layout, test procedures and inlet conditions required for testing coalescing filters, vapor filters, and solid particle filters used in compressed air systems, to determine their effectiveness in removing oil aerosol, oil vapor and solid particles. The measurements of the air purity downstream the filter for each specific contaminant have been performed according to the test methods described in respectively ISO 8573-2:2007, ISO 8573-5:2001 and ISO 8573-4:2001. Tests have been conducted in-house as well as in external labs, and are independently validated by TUV.

Haringa Compressor Inc provides a complete installation of ‘Industry Approved’ filtration systems.  Our team of professional installers will provide a safe piping design to effectively remove and collect all contamination and to be free of leaks to meet your system performance requirements.  You can always count on Haringa Compressor Inc for all of your compressed air system needs!

 

SELECTING THE BEST SERVICE & INSTALLATION COMPANY FOR YOUR SYSTEM REQUIREMENTS…

Simply stated, Haringa’s advanced technology and solutions are designed to optimize your compressed air system. Every air system requires regular maintenance and service to sustain its operating efficiency – including proper replacement and service to all compressed air line filter elements.  Haringa Compressor Inc includes full service of these critical components with our annual Preventive Maintenance Services.  Visible Moisture and oil contamination int he air stream can impact production quality and up-time, trust in Haringa Compressor to keep your plant safe and compliant to your OEM equipment specifications with routine system maintenance.

Additional Information

Weight 11.5 lbs
Dimensions 6.7 × 6.7 × 20.4 in

Reviews

There are no reviews yet.

Be the first to review “350 CFM High Efficiency Filter | Ingersoll Rand FA600IH”

Your email address will not be published. Required fields are marked *