120 CFM High Efficiency Filter | Atlas Copco PD50+


DD+ / PD+ / QD+ Series Compressed Air Line Filters


At different points of use, different compressed air purities might be needed, depending on the application. The various air purity classes are provided in the table below, which clearly shows the various Atlas Copco filters and dryers that meet all the different classes.

DD+ Series     |     0.1 ppm (Oil)  & 1 micron (Particulate) Filter rating

PD+ Series     |     0.01 ppm (Oil) & 0.01 micron (Particulate) Filter rating

QD+ Series    |      0.003 ppm (Oil Vapor – Carbon) Filter rating


SKU: 8102260570 Categories: ,

Product Description


  • Air System Design Capacity:  120 CFM @ 125 PSIG
  • Filtration Efficiency Rating:
    • Liquid Removal = 0.01 ppm
    • Particle Filtration = 0.01 micron
  • Inlet Pressure Range:  0-290 PSIG
  • Maximum Operating Pressure:  290 PSIG
  • Dimensions:  4.3″ L x 3.9″ W x 14.7″ H
  • Connection Size:  1″ NPT
  • Shipping Weight:  4.2 Lbs
  • ISO Certification
    • ISO 8573-2
    • ISO 12500
  • SKU Part # 8102260570
  • * 1-YEAR Full Warranty & Protection Program



Compressed air can be contaminated by dirt, water and oil, which can be further divided as follows:

  • DIRT: micro-organisms, dust, solid particles, rust particles.
  • WATER: water vapor, condensed liquid water, water aerosols, acidic condensates.
  • OIL: liquid oil, oil aerosol, hydrocarbon vapor.

Haringa offers a wide selection of filtration solutions and application knowledge.  Different product types and grades are available to meet your every demand.


Optimal dry dust filtration

DD(+) and PD(+) filters efficiently prevent dust, particulates and micro-organisms arising from corrosion, dirt and adsorption material from entering your compressed air stream. These innovative filtration solutions are engineered to cost-effectively provide the best air purity and meet today’s increasing quality demands.

Maximum dirt, solid particles, micro-organisms and rust particles removal, High-efficient glass fiber and foam media.

Significant energy savings & limited system operating costs, Optimal design and filter media allow for low pressure losses.

High reliability, High-performance stainless steel cores, double O-rings, epoxy sealed caps, and anti-corrosive coated filter housing.

Easy maintenance, External ribs on the threaded housing, or a rotating bottom cover for the welded housings, and push-on elements.

 Monitoring of energy use, Differential pressure indication (indicator for sizes 21-83 CFM, gauge for sizes 120-17,000 CFM) (optional for standard range).



Atlas Copco filters are qualified according to the ISO 8573-1:2010 standard. This is the latest edition of the standard.  Beware of filters that comply with earlier editions, such as ISO 8573-1:1991 or ISO 8573-1:2001.  The difference is inferior quality of the delivered compressed air. This qualification is a result of our filters being tested according to ISO 12500-1:2007, ISO 12500-2:2007, and ISO 12500-3:2009. These specify the test layout, test procedures and inlet conditions required for testing coalescing filters, vapor filters, and solid particle filters used in compressed air systems, to determine their effectiveness in removing oil aerosol, oil vapor and solid particles. The measurements of the air purity downstream the filter for each specific contaminant have been performed according to the test methods described in respectively ISO 8573-2:2007, ISO 8573-5:2001 and ISO 8573-4:2001. Tests have been conducted in-house as well as in external labs, and are independently validated by TUV.

Haringa Compressor Inc provides a complete installation of ‘Industry Approved’ filtration systems.  Our team of professional installers will provide a safe piping design to effectively remove and collect all contamination and to be free of leaks to meet your system performance requirements.  You can always count on Haringa Compressor Inc for all of your compressed air system needs!



Simply stated, Haringa’s advanced technology and solutions are designed to optimize your compressed air system. Every air system requires regular maintenance and service to sustain its operating efficiency – including proper replacement and service to all compressed air line filter elements.  Haringa Compressor Inc includes full service of these critical components with our annual Preventive Maintenance Services.  Visible Moisture and oil contamination int he air stream can impact production quality and up-time, trust in Haringa Compressor to keep your plant safe and compliant to your OEM equipment specifications with routine system maintenance.

Additional Information

Weight 4.2 lbs
Dimensions 4.3 × 3.9 × 14.7 in


There are no reviews yet.

Be the first to review “120 CFM High Efficiency Filter | Atlas Copco PD50+”

Your email address will not be published. Required fields are marked *